|
Post by MarkGregor on Mar 29, 2018 15:21:39 GMT
Glenn,
In doing further research w Tecnam I believe the numbers I posted above are in fact the latest P2008 test calibration settings.
They may improve the Astore AP performance also (the numbers given above were also installed in the latest Astore)but if your AP is working well in your Astore I strongly suggest leaving them where they are at.
Software versions can affect the settings also so be sure you have the latest software installed.
Always keep a copy of your original settings so you can go back. Changing one value affects other parameters.
For further details contact me directly!
Mark Gregor Advanced Aircraft 507-327-9465
|
|
|
Post by LSA Flyer on Mar 29, 2018 16:05:23 GMT
Did an hour tuning flight this morning. Ended up with the roll servo at 70% T and 1.10 Gain. That was pretty solid with a very occasional, mild wing wag. Any further adjustments would be in .5 steps. Thanks for everyone's advice. Take a screen shot or write down your starting settings as Mark advises before changing anything.
|
|