|
|
Post by slingpilot on Jul 28, 2019 12:54:23 GMT
Anyone else fall into this SB? Appear to encompass a large batch of engine/serial numbers and carbs.
|
|
|
|
Post by ChiMike on Jul 28, 2019 13:52:27 GMT
I do.
|
|
|
|
Post by Glenn on Jul 28, 2019 14:30:40 GMT
Yep, me too.
|
|
|
|
Post by ChiMike on Jul 28, 2019 17:31:42 GMT
So how bad is this and what is Rotax paying for?
|
|
|
|
Post by grantopperman on Jul 28, 2019 17:42:09 GMT
Anyone else fall into this SB? Appear to encompass a large batch of engine/serial numbers and carbs. Me three. I just read the PDF. Is it clear to any of you the time for compliance? I don't see it listed. Usually, SBs say "before next scheduled maintenance" or "within next 100 hours" or at worst "before next flight." I didn't see any of that wording. I'm also attaching the PDF for anyone who wants to review it here. |
|
|
|
Post by Glenn on Jul 28, 2019 17:45:55 GMT
I quickly scanned the instructions but I think it said within the next 25 hours but no later than July 31, 2020. I have re-read it to verify my memory.
|
|
|
|
Post by grantopperman on Jul 28, 2019 17:46:51 GMT
I'll look again. I scanned quickly before. Sloppy reading habits!
|
|
|
|
Post by Glenn on Jul 28, 2019 17:56:46 GMT
So how bad is this and what is Rotax paying for? 1.1 hours of labor. |
|
|
|
Post by slingpilot on Jul 28, 2019 23:55:15 GMT
I have to find someone familiar with Rotax in my area, as I don’t want to have to fly back four hours to Michigan where I had my annual done last month, for an hour or two or work. Anyone have a good Rotax service center in NY or NEPA?
|
|
|
|
Post by Tony on Jul 29, 2019 0:24:39 GMT
No first hand knowledge in that area but you could start here. The new circlip has a new part number. I wonder how long before everyone gets it in stock? |
|
|
|
Post by slingpilot on Jul 29, 2019 13:15:19 GMT
No first hand knowledge in that area but you could start here. The new circlip has a new part number. I wonder how long before everyone gets it in stock? Thanks Tony |
|
|
|
Post by Cluemeister on Jul 29, 2019 16:41:53 GMT
25 hours is 3 months for a 100 hour flyer. Hopefully the parts will be in stock. Anyone check with Lockwood or their local Rotax service center regarding parts availability yet?
|
|
|
|
Post by buzz on Jul 29, 2019 18:44:45 GMT
Me too
|
|
|
|
Post by montanapilot on Jul 29, 2019 19:06:25 GMT
I just talked to Joe at Lockwood. He says no parts yet and not sure when they'll be delivered.
|
|
|
|
Post by Cluemeister on Jul 30, 2019 0:48:52 GMT
Is anyone not in this group of serial numbers? I'm in here as well.
|
|
