|
Post by Glenn on Jun 17, 2018 16:21:11 GMT
Version 6.0 is available.
|
|
|
Post by Cluemeister on Jun 18, 2018 0:41:04 GMT
Downloaded, plan to install later this week. Warn me if there's a found glitch!
|
|
|
Post by jetcat3 on Jun 18, 2018 1:16:02 GMT
Couldn’t seem to get 5.9 to load so hopefully this will work!
|
|
|
Post by Flocker on Jun 19, 2018 14:03:27 GMT
Flew with 6.0 this morning. No issues to report.
|
|
|
Post by stroudj on Jun 19, 2018 19:09:52 GMT
I flew this morning also. No issues with 6.0.
Jim
|
|
|
Post by Tony on Jun 19, 2018 22:19:01 GMT
Notice any improvements?
|
|
|
Post by stroudj on Jun 20, 2018 1:18:43 GMT
I noticed no changes. Jim
|
|
|
Post by Cluemeister on Jun 20, 2018 11:41:40 GMT
Was the AOA warning louder? Did you notice a difference on landing as it was beeping in your ear?
|
|
|
Post by Flocker on Jun 20, 2018 12:09:14 GMT
I noticed no changes. Jim Same here.
|
|
|
Post by ChiMike on Jun 22, 2018 0:28:11 GMT
If no one is noticing any changes, what is the upgrade supposed to accomplish?
|
|
|
Post by Cluemeister on Jun 22, 2018 1:08:35 GMT
Changes made from version 5.90 to 6.00: Add enhanced EIS data messages to Text Out RS-232 format Add ability to use GEA 24 RPM2 input as an additional discrete input Add additional CAS messages to data log file Add support for Rotax FADEC fuel pressure calibration and adjustment for manifold pressure Improve map update rate Improve GMC 30x annunciator light processing Improve heading bug synchronization between displays Improve visibility of HSI heading pointer Improve traffic display Improve Connext data processing Improve GDL 39 data processing Improve AOA/stall warning tone output Improve display backlight adjustment Improve CO detector cabin altitude display Change Rotax FADEC oil pressure to use compensated (gauge) value General improvements to system operation Includes update to G5 software version 5.30 Includes update to GAD29 software version 3.00 Includes update to GDL5X software version 2.11 Includes update to GEA24 software version 3.20 Includes update to GMC507 software version 2.30 Includes GAD27 software version 2.20 Includes GDL39 software version 4.80 Includes GI260 software version 2.70 Includes GMA245 software version 2.40 Includes GMA245 audio software version 2.20 Includes GMA245 Bluetooth software version 2.00 Includes GMU11 software version 2.00 Includes GPS20A software version 2.20 Includes GSA28 software version 4.10 Includes GSU25 software version 3.70 Includes GSU73 software version 3.70 Includes GSU73 IGRF database version 1.03 (Base Year 2015) Includes GTR20/200 software version 2.90
|
|
|
Post by ChiMike on Jun 22, 2018 3:38:07 GMT
I’ve got a GTN 650-G3X combo. Any ideas on whether installing the update could affect that interface?
|
|
|
Post by Cluemeister on Jun 22, 2018 20:16:38 GMT
You can call Garmin support and ask the Experimental team for their thoughts.
|
|
|
Post by Tony on Jun 25, 2018 1:11:34 GMT
What is the difference between GDU 37x and GDU 4xx? Not sure how to determine what is the right one for my G3X Touch GDU 4xx is the touch.
|
|
|
Post by ChiMike on Jun 25, 2018 1:12:38 GMT
Thank you.
|
|