New to the forum and need a little help

[islandboy]

Hello All 

New to the forum and fairly new to the tecnam. I bought a Tecnam p92 echo on amphibs and am wanting to put it on wheels for the winter months and am short a couple parts. I have the landing gear legs and most of the nose gear but missing the 2 arms that the nose wheel fasten to. Any sort of template of that would be greatly appreciated. and i'm short the wheels and brakes but i think ill look at the beringer for it. Well thank you in advance also located in ontario.

Islandboy

[LSA Flyer]

Just in case you don't have the IPC, here is a link: www.whangareiflyingclub.com/wp-content/uploads/2012/10/P92-Eaglet-parts-manual.pdf

Sounds like you want to self-fabricate but if not, the IPC will allow you to identify part numbers if you call Sebring.

[cole505]

Hi Island Boy,

Welcome to our forum! I hope you can fabricate or buy the parts you need………. There are some very knowledgeable pilots here on Tecnam Talk……. Please tell us a little more about your self, home airport etc……

Ray & Lucy 👍🏻🇺🇸✈️😊✅

[islandboy]

Thank you E-LSA Flyer on i think it is page 50 fig 4.1 nose gear structure Item #4 is what i am looking for. And that you for the IPC this is very helpful. Home airport is CNN8. Started flying (training) in a Icarus C42 nice plane. Then bought first plane which was a Rans s6es, Bought a Murphy Rebel and now flying a 2002 Tecnam P92 echo 100hp uls. I live in the 1000 islands, kingston area(ontario) i have a 1100' strip beside my house which is a little rough for the amphibs.(shopping cart wheels on the front) they are the Zenair floats.
My P92 has an inflight adjustable prop. I like it. Its a fun little plane. I have a small home fabrication shop that has most of what i need to build most things. Thank you again.

Islandboy