DavidOber
Junior Member
Posts: 67
Home Airport: KTKI
|
Post by DavidOber on Feb 29, 2020 0:21:06 GMT
 These are the situations I get myself into. Couldn't get it unstuck by myself...had to call the FBO to send some guys over. They had a good laugh and says it happens all the time  . Going to Home Depot and buy a 2x8. |
|
ATP Time Builders
New Member
Starting new biz to expedite ATP pilots to Airlines
Posts: 23 
Home Airport: Henderson Executive Airport, Las Vegas
|
Post by ATP Time Builders on Feb 29, 2020 1:14:48 GMT
Did you try one wheel at a time? Just asking...
Beautiful plane. You might consider two plastic 1/8" x 12" x 4' sheets with 2 cross runners epoxied to the bottom to fit between the floor steel runners to keep it from moving. The 2" may be too hard and too heavy to run the wheels up. I bought some steel plates to go on the ends of some 2x8's and that would work but would think the thin plastic sheets would work really well. Cut 2 pieces off of the 1/8" x 12" x 48" sheets to make the cross runners.
Just a suggestion.
|
|
. Going to Home Depot and buy a 2x8.
