|
Post by marcush on Jul 19, 2020 21:19:33 GMT
I've recently purchased a P2002 EA Sierra with a VP prop and a Smart Avionics CSU.
Would anybody have some guide figures as to RPM to set on the prop and MAP for various stages of flight?
We've been flying the aircraft the last few days and were wondering if our settings were common.
E.G. Climb 5400 rpm and 28 MAP and cruise 4800 rpm and 25 MAP.
Any advice appreciated, thanks.
|
|
|
Post by Flocker on Jul 20, 2020 10:45:11 GMT
What engine?
|
|
|
Post by marcush on Jul 21, 2020 8:24:58 GMT
It's a Rotax 912 ULS. 4 stroke Mogas 100hp. Thanks.
|
|
|
Post by LSA Flyer on Jul 22, 2020 0:57:52 GMT
|
|
|
Post by marcush on Jul 22, 2020 6:43:00 GMT
Excellent! Thanks very much.
|
|
John Crone
New Member
Posts: 33
Home Airport: North Shore, New Zealand
|
Post by John Crone on Jul 23, 2020 20:12:11 GMT
I have an Airmaster CSU with factory setting of 5750 for T/O, 5500 for climb and 5000 cruise. They are adjustable but seem right to me. I generally cruise at 26 MAP. Your 2400/25 seems low but will give good fuel economy, however is your oil temperature high enough?
|
|
|
Post by marcush on Jul 27, 2020 16:05:20 GMT
OK thanks. My settings are the same as yours. Not sure where you got 2400/25 from?
|
|
John Crone
New Member
Posts: 33
Home Airport: North Shore, New Zealand
|
Post by John Crone on Jul 29, 2020 5:16:28 GMT
I've no idea either! Sorry I meant 4800/25. The Airmaster also has a setting for 4800 which I use to slow down for turbulence with MAP at 24, but I find the oil temperature gets a bit low
|
|